Transmitter remote control 8 channels

Pairing Procedure

1️⃣ Enter Pairing Mode

Press and hold the first three functions simultaneously:

• 🔴 Red OFF

• ➡️ Side Shift Right

• ⬅️ Side Shift Left

Holding time: approximately 5 seconds
Indication: after this time, the red indicator LED starts blinking slowly, indicating pairing mode.

2️⃣ Activate PTO

Within a short time interval after the LED starts blinking:

• Quickly switch ON the PTO (Power Take-Off)

⚠️ Important: This step must be performed immediately without delay.

3️⃣ Complete Pairing

Press and hold the following two functions simultaneously:

• ➡️ Side Shift Right

• ⬅️ Side Shift Left

This completes the pairing process.

ℹ️ Note

This procedure is required for successful device pairing.
Ensure that all steps are performed in the specified order, otherwise correct system operation cannot be guaranteed.