Epix10+ Strobe Auxiliary Light 10" (Powerboost)
Epix10+ Strobe by Ledson is an innovative series of auxiliary lights that will take your vehicle to the next level. These lights are equipped with 5 different flashing patterns, one of which is R65 approved. Thanks to the Swedish design language developed by Ledson and its excellent performance, these auxiliary lights give your vehicle a unique and exclusive look that is guaranteed to attract attention! Experience outstanding brightness and design in perfect balance.
Flash Patterns:
- Single flash (ECE R65 approved)
- Double flash
- Triple flash
- Quad flash
- Continuous hyper flash
Synchronization and Alternating Patterns:
The Epix10+ strobes can be synchronized, so all lights flash in the same way. They can also be divided into two groups that flash alternately, creating 10 different patterns. There is no limit to the number of additional lights.
Dynamic Position Light:
This light turns on smoothly, giving your vehicle a unique look.
Powerboost for Maximum Brightness:
The Epix10+ features a Powerboost function that increases brightness to the maximum level. It is easily activated with the high beam lever, and you can also change modes using the horn. Please note that the light is delivered in the ECE-approved mode, and you must follow the instructions to activate Powerboost.
| Category: | LEDSON |
|---|---|
| Weight: | 1.6 kg |
| Voltage: | 9-36V |
| Diode type: | LED |
| IP Rating: | IP69K |
| Power: | 150W (10x15W CREE LED) |
| Flashing light power: | 20W (4x5W LED) |
| Homologation: | ECE R10, ECE R112, ECE R65, R7 |
| Color temperature: | 5000K |
| Luminous flux: | 8200Lm actual |
| Power boost: | YES |
| Load in approved mode: | 2.2 A at 12 V and 1.1 A at 24 V (high beam only, without position light) |
| Load in POWERBOOST mode for high beam: | 10.6 A at 12 V and 4.8 A at 24 V (high beam only, without position light) Jazyková verze (PL) |
Epix10+ Stroboskopické pomocné světlo 10" (Powerboost)
Product rating
Be the first who will post an article to this item!