Rear mounting frame for 3 Ledson Breeze X1 LED lights
Want to install a trio of rear lights without complex bodywork cutting?
This mounting frame for 3 Ledson Breeze X1 LED lights offers an elegant, fast, and professional surface-mounting solution for combination rear lights (also suitable for single-function Breeze X1 lights). Thanks to this frame, you don't need to cut large rectangular openings into the bodywork of your vehicle, tractor unit, or trailer. Only small holes for mounting screws and cable routing are required. The frame holds all three lights in one perfectly aligned row, giving them a clean finish.
What this black plastic frame for 3 Breeze lights offers you in practice
- Easy surface mounting without cutting: Allows you to fit a trio of modular lights directly onto a flat bodywork, bumper, or superstructure surface without cutting large holes into the sheet metal.
- Precise sizing for the Ledson Breeze X1 series: The internal mounting hole spacing of 87 × 110 mm precisely matches the rectangular Ledson Breeze X1 LED lights (and other variants in this range) with identical dimensions.
- Durable ABS plastic: Made of strong, dimensionally stable black plastic that is highly resistant to UV radiation, flying gravel, and high-pressure washing.
- Clean and professional aesthetics: Hides the mounting edges of individual lights and transitions to the mounting surface, creating a unified look for the vehicle's entire rear lighting setup.
Practical use for the 3 Ledson Breeze X1 LED light mounting frame in professional operations
The mounting frame for a trio of rear LED lights is designed to solve common challenges encountered during the assembly, conversion, or modification of lighting on trucks, tractor units, trailers, semi-trailers, vans, and commercial vehicles. When installing individual rectangular lights onto flat sheet metal or body structures, achieving an aesthetically pleasing appearance without deep cutouts into the vehicle structure can be difficult. This triple surface-mount frame creates a continuous cover panel into which you simply insert three individual Ledson Breeze X1 LED lights to build a compact light bar tailored to your needs.
How this rear mounting frame for 3 Ledson Breeze X1 LED lights helps you
- Problem with body damage and corrosion from cutting large openings: Traditional installation requires cutting a sizeable rectangular hole in the metal, compromising vehicle aesthetics and risking corrosion at the cut edges. Solution: The black plastic frame for 3 Breeze lights enables clean surface mounting. You only drill four mounting holes and one hole for the wiring harness, saving time and preserving bodywork condition.
- Problem with gaps between lights: When mounting three individual lights side by side, maintaining exact spacing and horizontal alignment is very challenging. Solution: The mounting bracket for three rear LED lights maintains a fixed line for all three positions. The lights fit in perfectly, resulting in a seamless factory-installed look.
- Problem with fitting a combination of different lighting functions: The rear of a recovery vehicle or trailer often requires a mix of tail/brake lights, indicators, fog lights, or reverse lights. Solution: The housing for 3 rear rectangular Ledson LED lights lets you freely combine various Ledson Breeze X1 modules on a single bracket, fully compliant with your needs and relevant regulations.
Construction and material properties of the Breeze X1 frame
The core material of this 3 LED light frame for trucks and trailers is high-impact ABS plastic in an elegant black finish. The material excels in mechanical strength, standing up to temperature fluctuations from freezing winter conditions to intense summer heat under direct sunlight. The surface of the frame is protected against UV radiation, preventing it from becoming brittle or losing its black colour over time.
Functional details of the frame for 3 rear rectangular Ledson LED lights
The frame features three individual positions with precisely formed cutouts. The internal hole spacing of 87 mm width by 110 mm height guarantees total compatibility with Ledson Breeze X1 modular lights. Securing mounting screws hold the lights firmly in place within the frame, while the frame itself sits flush against the bodywork surface. The design also helps protect the back of the lights and their cable grommets from direct splashes of water, mud, and road salt.
Mounting procedure and installation recommendations for the 3 Breeze X1 LED light frame
Although installation is straightforward, we recommend following these step-by-step instructions to achieve optimal sealing and durability:
Proper procedure for securing the frame to the vehicle:
First, position the mounting cover for 3 LED lights for trucks and trailers at the desired location on the bodywork and mark the centres for the mounting screws and the wiring harness opening. After drilling the holes, we recommend treating the drilled edges with an anti-corrosion coating. Pass the cables of the Ledson Breeze X1 lights through the rear cutout in the frame, secure the lights into the individual positions of the frame, and then screw the fully assembled bracket to the vehicle. To completely prevent water ingress behind the frame, apply a thin bead of sealant along the rear perimeter edge.
Who this triple surface-mount frame is designed for
This product is an ideal choice for coachbuilders, trailer manufacturers, tuning workshops, transport companies, and private owners of tractor units and vans seeking a clean, reliable, and visually appealing installation for three rear Ledson Breeze X1 LED lights without complex bodywork modifications.
| Category: | LEDSON |
|---|---|
| Warranty: | 2 years |
| Number of positions: | 3 |
Product rating
Be the first who will post an article to this item!
