Traffic Advisor Lightbar 916x35 mm, 54 LED, 6 Functions
The traffic advisor has a 6-warning flash function. It features 54 LEDs and a power consumption of 44W. This lightbar is certified according to ECE R65 and ECE R10 standards. The cable length with a cigarette lighter plug is 3m. The voltage is 12V / 24V.
We recommend that installation is carried out by a service centre or a professional technician. The installation must be insulated with suitable tape or heat-shrink tubing. Water or moisture must not be allowed to enter the lightbar as this would damage the electronics. Do not cut the tinned ends of the wires. Install according to UNECE regulations.
Instructions
• It should be used exclusively in accordance with its intended purpose.
• To be installed exclusively in specialised workshops.
• The connection between the lamp and the vehicle's installation should be insulated with heat-shrink tubing or, alternatively, with insulating tape to prevent water and moisture from entering the lamp's copper wire, which could damage the electronic components. As for the lamp and plug, the plug should be mounted securely.
• Do not cut off the tinned ends.
• The lamps must be installed only in accordance with UNECE regulations -- Install the lamp only on a flat, metal, dry, cleaned and degreased roof surface. The maximum speed of a vehicle with a warning lamp attached by a magnet to the roof surface is 50 km/h. Take special care in windy conditions. Do not unscrew the lamp, as it will lose its water resistance.
| Category: | Naváděcí světla |
|---|---|
| Weight: | 2.4 kg |
| EAN: | 5901741301928 |
| Number of LEDs: | 54 |
| Power: | 44 W |
| Voltage: | 12 / 24 V |
| Cable length: | 3000 mm |
| Mounting: | šrouby |
| IP Rating: | IP67 |
| Standards: | R10,R65 |
Product rating
Be the first who will post an article to this item!