WAS Strobe Beacon 12-24V with Synchronisation
The strobe beacon (predator) is certified according to ECE R10, ECE R65 standards.
This strobe beacon (predator) is made of high-quality aluminium treated with black paint. It is possible to change its program to a single or double flash. Furthermore, it is possible to synchronise the lighting of several of these beacons (predators). This means that with the correct wiring, these beacons can flash alternately or together (in-phase or out-of-phase). The package includes two spacer pads of different thicknesses - a rubber (lower) one and a plastic (higher) one. The beacons can thus be installed at any angle on a vertical plane.
Predator Wiring
Black: + plus
White: - ground
Red: change programs, connect to + for 1s
Yellow: synchronisation cable A
Blue: synchronisation cable B
Grey: "MASTER" function, connect to "+" and it will then control the other predators. If not MASTER, do not connect to +.
! WARNING ! The yellow and blue synchronisation cables must not be connected to "+" = destruction of the control module!!!!!!
| Category: | LED Strobe Lights |
|---|---|
| Weight: | 0.2 kg |
| Number of LEDs: | 30 |
| Power: | 21 W |
| Cable length: | 3000 mm |
| Voltage: | 12/24 V |
| IP rating: | IP6K9K |
| Light type: | LED |
WAS W217
Product rating
Be the first who will post an article to this item!
