Beacon Lightbar 1230x200 mm, 138LED, 4+4 Functions
The warning beacon lightbar has the following functions: 4 warning flashes, 4 alternating flashes. The lightbar includes a control panel that can be used to change or turn off the flashes. It features 138 LEDs. It has a power input of 138W. It is a certified product according to ECE R65 and ECE R10 standards. The cable length is 3500 mm. The voltage is 12V / 24V.
Connect the lightbar to the vehicle using insulating tape or heat shrink tubing. Water and moisture must not get into the copper cable of the lightbar. This could damage the electrical system. For lamps that have a plug, insert it firmly. Do not cut the tinned ends of the wires. For the lightbar, we recommend having the connection carried out by a professional or a service centre.
| Category: | Lightbars |
|---|---|
| Weight: | 8.5 kg |
| EAN: | 5905358305935 |
| Cable length: | 3500 mm |
| Voltage: | 12 /24 V |
| Power consumption: | 138 W |
| Mounting: | screws |
Product rating
Be the first who will post an article to this item!
Related products
LED silniční světlomet má funkce: denní jízda, dálková světla. Disponuje16 LED diodami a má svítivost 5800 LM. The LED driving lamp features daytime running and high beam...
Installation harness for work lamps and LED panels up to 120 W.Equipped with a fuse, relay, and manual switch.
Straight CREE LED bar. Combination work bar with spot and flood reflectors. The lamp has a long range of up to 550 metres. Equipped with 66 diodes with a total...
Straight CREE LED bar. Combination work bar with spot and flood reflectors. The lamp has a long range of up to 300 metres. Equipped with 42 diodes with a...
Can be used with lights: TT.13208, TT. 13217, TT.13216, TT.13206, TT.13228, TT.13229, TT.13226, TT.13227, ...
Alternative products
R65 approved light output. Extra flat and aerodynamic design. Best manufacturer quality in its class. Ultra robust polycarbonate. The STELLAR lightbar completes our range of...
Additional equipment: 2x tail/brake lights/indicators, 4x rear work lights, 2x side marker lights R65...
The LED beacon lightbar has an 8-warning flash function. It contains 144 LEDs. The power consumption of the lightbar is 80W. It is a certified product according to ECE R65, ECE...
Beacon with blue-red light, equipped with 42 energy-saving LEDs with high light emission brightness. High durability with a slim design, flash mode switching function....
Additional equipment: 2x tail/brake lights/indicators, 4x rear work lights, 2x position lights R65 approved light output. Extra...
R65 approved light output. Extra flat and aerodynamic design. Best-in-class manufacturer quality. Ultra-robust polycarbonate. The STELLAR lightbar complements our range of...
This lightbar has the following functions: 4 warning flashes, two intensity levels for day and night. It comes with a controller. It features 252 LEDs and has a power...
Tato majáková rampa má tyto funkce: 4 výstražná bliknutí, dvě úrovně intenzity, den a noc. Je k ní ovládač. Má 252 LED diod a příkon 122 W. Rampa je certifikovaná podle norem...
The LED warning lightbar has these functions: 4 warning flashes, two intensity levels (day and night), and a control panel. It has 108 LEDs and a power consumption of 74 W. It...
Light arrow with electric lifting
Beacon with amber light, equipped with 66 energy-saving LEDs with high brightness light emission. Complete lightbar with many application variants. LED power supply 12-24VDC....
This beacon lightbar features completely new and innovative LED technology and a modern, aerodynamic design. It provides a very bright light, where individual LEDs are not...
Lightbar with a double-layer amber light source, equipped with 66 energy-saving LEDs with high light emission brightness. Patented lens with wide-angle light diffusion...
Orange lightbar with an LED warning beam. The lightbar is ECE R10 certified and has an IP68 protection rating. The cable length is 1.5 m and the operating voltage is 12 / 24 / 33V.
