LED Lightbar 1528mm
This lightbar has the following functions: 4 warning flashes, two intensity levels for day and night. It comes with a controller. It features 252 LEDs and has a power consumption of 122 W. The lightbar is certified according to ECE R65 and ECE R10 standards. The cable length is 5m. The voltage is 12 V / 24 V.
Instalaci by měl provést odborný pracovník nebo servis. Připojení majáku na vozidlo musí být izolováno smršťovací bužírkou nebo izolační páskou. Do měděného kabelu majáku se nesmí dostat vlhkost, ani voda.U žárovek se zástrčkou zasuňte zástrčku dostatečně a pevně. Pocínované konce drátů nestříhejte. Rampy musí být instalovány pouze na rovný, kovový, suchý, očištěný a odmaštěný povrch střechy. Maximální rychlost vozidla s majákem připevněným na střeše magnetem je 50 km/h. Buďte obezřetní v nepříznivých větrných podmínkách. Pokud majákovou rampu rozeberete, ztratí vodotěsnost.
| Category: | Lightbars |
|---|---|
| Weight: | 9.5 kg |
| EAN: | 5901741300075 |
| Number of LEDs :: | 252 |
| Power: | 122 W |
| Voltage: | 12 / 24 V |
| Cable length: | 5000 mm |
| Mounting: | screws |
Product rating
Be the first who will post an article to this item!
Related products
LED silniční světlomet má funkce: denní jízda, dálková světla. Disponuje16 LED diodami a má svítivost 5800 LM. The LED driving lamp features daytime running and high beam...
A top-quality work light bar with a strobe light that does not cause radio wave interference thanks to CISPR25 Class 4 noise reduction. Resistant to pressure washing with a...
Straight CREE LED bar. Combination work bar with spot and flood reflectors. The lamp has a long range of up to 300 metres. Equipped with 42 diodes with a...
Can be used with lights: TT.13208, TT. 13217, TT.13216, TT.13206, TT.13228, TT.13229, TT.13226, TT.13227, ...
Installation harness for work lamps and LED panels up to 120 W.Equipped with a fuse, relay, and manual switch.
Straight CREE LED bar. Combination work bar with spot and flood reflectors. The lamp has a long range of up to 550 metres. Equipped with 66 diodes with a total...
Alternative products
The LED warning lightbar has these functions: 4 warning flashes, two intensity levels (day and night), and a control panel. It has 108 LEDs and a power consumption of 74 W. It...
Additional equipment: 2x tail/brake lights/indicators, 4x rear work lights, 2x clearance lights R65...
The LED beacon lightbar has an 8-warning flash function. It contains 144 LEDs. The power consumption of the lightbar is 80W. It is a certified product according to ECE R65, ECE...
Orange lightbar with an LED warning beam. The lightbar is ECE R10 certified and has an IP68 protection rating. The cable length is 1.5 m and the operating voltage is 12 / 24 / 33V.
Beacon with amber light, equipped with 66 energy-saving, high-brightness LEDs. A complete lightbar with many application variants. Amber top cover, transparent front cover....
R65 approved light output. Extra flat and aerodynamic design. Best manufacturer quality in its class. Ultra robust polycarbonate. The STELLAR lightbar completes our range of...
The LED beacon lightbar has an 8-warning flash function. It features 144 LEDs and an 80W power output. The lightbar is certified according to ECE R65 and ECE R10 standards. The...
Tato majáková rampa má tyto funkce: 4 výstražná bliknutí, dvě úrovně intenzity, den a noc. Je k ní ovládač. Má 252 LED diod a příkon 122 W. Rampa je certifikovaná podle norem...
Light arrow with electric lifting
The control panel operates on a voltage of 12 - 24 V. It has several uses with easy installation in a vehicle. Output voltage 5 V
The warning beacon lightbar has the following functions: 4 warning flashes, 4 alternating flashes. The lightbar includes a control panel that can be used to change or turn off...
